4.0.0 HP Polyserve Matrix Server Command Reference Guide (T5392-96048, March 2010)

The application tag associated with this Virtual MSDTC. If you do not specify an
application, the IP address for the Virtual MSDTC will be used.
[--force yes|no]
When set to yes, this option causes the operation to complete even if it encounters
an error.
<ip> is the IP address for the Virtual MSDTC. <name> is the NetBIOS name and
can include up to 15 characters.
The order in which you specify the network interfaces determines the ordering for
failover. The first network interface is the primary interface; network traffic for the
Virtual MSDTC goes to the node providing this interface. The remaining network
interfaces are backups. Each network interface must be located on a different node.
delete—Delete a Virtual MSDTC
mx vmsdtc delete [--force yes|no] <vmsdtc> ...
disable—Disable a Virtual MSDTC
mx vmsdtc disable <vmsdtc>
dump—Dump the Virtual MSDTC configuration to stdout
mx vmsdtc dump
enable—Enable a Virtual MSDTC
mx vmsdtc enable |<vmsdtc>
move—Rehost a Virtual CIFS Server to the specified interface
mx vmsdtc move [--policy autofailback|nofailback] [--application
<application>] [––force yes|no] <ip> <name> << network_interface> ...>
The options are the same as vmsdtc add.
status—View status for a Virtual MSDTCs
mx vmsdtc status [arguments] [<vhost> ...]
The arguments are:
[--primary|--backup]
[--active|--inactive]
[--up|--down]
[--enabled|--disabled]
[--showApplication]
With no arguments, the command displays the status of all virtual hosts.
mx commands130