4.0.0 HP Polyserve Matrix Server Command Reference Guide (T5392-96048, March 2010)

update—Modify an existing virtual host
mx vhost update [--application <application>] [--policy autofailback|
nofailback] [--activitytype single|always] <vhost> ([<network_interface> ...]
[ALL_SERVERS <network_interface>])
Use this option to change the arguments or the ordering of the network interfaces for
failover.
mx vmsdtc – Virtual MSDTC commands
Use the following commands to configure a Virtual MSDTC or to display status.
DescriptionCommand
add a new Virtual MSDTCadd
delete a Virtual MSDTCdelete
disable a Virtual MSDTCdisable
dump the Virtual MSDTC configurationdump
enable a Virtual MSDTCenable
rehost, or move, a Virtual MSDTC to another servermove
show status for a Virtual MSDTCstatus
modify an existing Virtual MSDTCupdate
add—Add a new Virtual MSDTC
mx vmsdtc add [--policy autofailback|nofailback] [--application
<application>] [––force yes|no} <ip> <name> << network_interface> ...>
The options are:
--policy autofailback|nofailback
The failback action that the Virtual MSDTC will take following failover to a backup
node. autofailback will fail back when a higher-ranked node provides equal or
greater services than the backup node; nofailback fails back only if a higher-
ranked node provides greater services than the backup node. autofailback is
the default.
--application <application>
PolyServe Software command reference guide 129