4.0.0 HP Polyserve Matrix Server Command Reference Guide (T5392-96048, March 2010)

DescriptionCommand
Disable a Virtual File Sharedisable
Dump the Virtual File Share configurationdump
Enable a Virtual File Shareenable
Show the status of a Virtual File Sharestatus
Modify an existing Virtual File Shareupdate
add—Add a Virtual File Share
mx vfs_share add ––path <path> [arguments] \\<vfs>\<vshare> ...
<path> is the location of the Virtual File Share (such as y:\myshared). This is typically
the drive letter or path assigned to the PSFS filesystem that will be accessed via this
share.
\\<vfs>\<share> specifies the name of the Virtual CIFS Server and the Virtual
File Share. Following is an example:
mx vfs_share add --path y:\myshared \\myvfs1\vshare1
The arguments are:
[--timeout <seconds>]
The maximum amount of time to wait for a probe of the Virtual File Share to
complete. The default is five seconds.
[--frequency <seconds>]
The interval of time at which the monitor probes the Virtual File Share. The default
is 10 seconds.
[--comments <comment>]
A description of the Virtual File Share.
[--users_limit ALL_USERS|<limit>]
The number of users that will be allowed to access the Virtual File Share simul-
taneously. The maximum value is the system maximum, which is limited by the
available memory.
[--share_subdirs]
Share all subdirectories under the specified path.
[--probeSeverity nofailover|autorecover|noautorecover]
mx commands124