4.0.0 HP Polyserve Matrix Server Command Reference Guide (T5392-96048, March 2010)

The arguments are:

[--up|--down]

[--primary|--backup]

[--enabled|--disabled]

[--active|--inactive]

[--showApplication]

With no arguments, the command displays the status of all service monitors.

update—Modify (update) an existing service monitor:

mx service update [arguments] <vhost:port> ...

The arguments are the same as service add, with the exception that the type

argument is not valid.

mx snapshot – snapshot commands

Use the following commands to create or destroy hardware snapshots..

DescriptionCommand

Create a snapshotcreate

Destroy a snapshotdestroy

Show snapshot options for the storage array associated with a volumeshowcreateopt

create—Create a snapshot

mx snapshot create [—method <type>; [--terse] [<options>] <volume>

The options are:

--method <type>

The method can be hpeva or engenio. This option must always be specified for

engenio snapshots. For hpeva snapshots, the option is needed only if more than

one snapshot method is configured on the system.

--terse

On success, only the name of the snapshot volume is printed.

Before creating a snapshot, you will need to determine the options available for

the snapshot. Each type of array (for example, HP EVA or XP) provides its own

set of snapshot options. To see the options available for the array containing the

PolyServe Software command reference guide 119