4.0.0 HP Polyserve Matrix Server Administration Guide (T5392-96052, March 2010)

Select the dynamic volumes that you want to deport and click Deport on the toolbar.
To deport dynamic volumes from the command line, use this command:
mx dynvolume deport <volumeName>
Import a dynamic volume
When a dynamic volume is imported, the unimported LUNs associated with the
volume will be imported and the psv binding, which Matrix Server uses to control
access to the dynamic volume, will be created.
NOTE:
When you reimport a dynamic volume, the psv name assigned to the volume may
be different from the psv name used by the volume before it was deported. Matrix
Server does not reserve the psv name originally used by the volume, and may instead
assign it to another volume.
Configure dynamic volumes96