4.0.0 HP Polyserve Matrix Server Administration Guide (T5392-96052, March 2010)

Filesystem: If you want Matrix Server to create a filesystem that will be placed on
the dynamic volume, enter a label to identify the filesystem. If you do not want a
filesystem to be created, remove the checkmark from Create filesystem after volume
creation.
If you are creating a filesystem, you can also select the options to apply to the
filesystem. Click Options to see the Filesystem Option dialog, which allows you to
select the block size for the filesystem and to configure quotas. (See “Filesystem
options” on page 109 for details about this dialog.)
Available Subdevices: The display includes all imported subdevices that are not
currently in use by another volume and that do not have a filesystem in place.
Subdevices belonging to unimported volumes that are on imported disks are also
included in the display. The subdevices that you select are used in the order in which
they appear on the list. Use the arrow keys to reorder, one-at-a-time, the appropriate
subdevices and then highlight those subdevices.
Striping: If you want this volume to use striping, check Enable striping and then select
the size of the stripe. The default stripe size is 1 MB.
Click either OK or Apply to create the volume. (Apply keeps the window open,
allowing you to create additional dynamic volumes.)
Configure dynamic volumes86