4.0.0 HP Polyserve Matrix Server Administration Guide (T5392-96052, March 2010)

Show partition information
The -a option lists the partitions on each disk. When combined with -u, it displays
partition information for unimported disks.
# sandiskinfo -a
Show local device information
The -l option displays the local device name for each disk, as well as the default
disk information. When combined with -u, it displays local device names for
unimported disks.
# sandiskinfo -al
Show filesystem information
The -f option displays existing PSFS filesystems on imported disks.
Show available volumes
The -v option lists available volumes on imported disks. These volumes are not
currently being used for a PSFS filesystem or a membership partition.
# sandiskinfo -v
Options for dynamic volumes
The following sandiskinfo options apply only to dynamic volumes.
Show available subdevices
The --subdevices option lists subdevices that are available for use in constructing
a dynamic volume.
# sandiskinfo --subdevices
Subdevice: 20:00:00:04:cf:13:38:18::0/2 Size: 1950M psd1p2
Subdevice: 20:00:00:04:cf:13:38:18::0/7 Size: 490M psd1p7
Subdevice: 20:00:00:04:cf:13:38:18::0/8 Size: 490M psd1p8
Subdevice: 20:00:00:04:cf:13:38:18::0/9 Size: 490M psd1p9
Subdevice: 20:00:00:04:cf:13:38:18::0/10 Size: 490M psd1p10
Subdevice: 20:00:00:04:cf:13:38:18::0/11 Size: 490M psd1p11
Subdevice: 20:00:00:04:cf:13:38:18::0/12 Size: 490M psd1p12
Configure the SAN80