4.0.0 HP Polyserve Matrix Server Administration Guide (T5392-96052, March 2010)

in the Microsoft Windows 2003 distribution; however, it is not automatically installed.
To perform the installation, complete these steps:
1. Open the Control Panel and select Add or Remove Programs.
2. Double-click Add/Remove Windows Components. On the Windows Components
Wizard, select Management and Monitoring Tools and click Details.
3. On the Management and Monitoring window, select Simple Network
Management Protocol and click OK and then click Next on the following window.
4. Insert the Windows 2003 CD or specify the location of the files. The Wizard
will now install the software.
After the Microsoft SNMP service is installed, you will need to specify a community
string. The public community string is adequate, as the string is used only for read-only
operations. To add a community string, complete the following steps.
1. Open the Control Panel and select Administrative Tools.
2. Double-click Services. On the Services window, locate the SNMP Service,
right-click, and select Properties.
3. Open the Security tab and add the community name.
The Microsoft SNMP service is enabled by default and will automatically use the
Matrix Server extension agent.
View installed software
The Installed Software window lists the operating system and PolyServe software that
are currently installed on each server in the matrix. To see this window, select Help
> Installed Software.
Cluster administration46