4.0.0 HP Polyserve Matrix Server Administration Guide (T5392-96052, March 2010)

Membership partition timeout
The membership partition timeout should be increased to 120 seconds (120000ms).
This value is set in the registry. Complete the following steps:
Start regedit and navigate to the following registry key:
[HKEY_LOCAL_MACHINE\SOFTWARE\PolyServe\MatrixServer\mxservice\Started
Processes\sanpulse]
Double-click ProgramArguments and, on the Edit String dialog, enter -o
sdmp_io_timeout=120000 as the Value data.
Following is an example of the updated value:
PSFS/psd timeout
This timeout affects the psd devices that make up the abstracted block layer to PSFS
filesystems. Increase the timeout to 180 seconds. The timeout is set in the following
file:
%SystemDrive%\Program Files\PolyServe\MatrixServer\conf
Locate the following line in the scl.conf file:
#psd_timeout 90
Remove the comment character (#) at the beginning of the line and set the psd_timeout
value to 180:
SAN maintenance260