4.0.0 HP Polyserve Matrix Server Administration Guide (T5392-96052, March 2010)

Add or modify a device monitor
Select the appropriate option from the PolyServe Management Console:
• To add a new device monitor, select a server to be associated with the monitor
from the Servers window, right-click, and select Add Device Monitor (or click
Device on the toolbar). Then configure the device monitor on the New Device
Monitor window.
• To update an existing device monitor, select the monitor on the Servers window,
right-click, and select Properties. Then make your changes on the Device Monitor
Properties window.
Device name: Enter the name of the device monitor. You can use up to 32
alphanumeric characters.
NOTE:
This field does not appear if you are creating an NTSERVICE monitor. Instead, you
will be asked for the name of the NT service that you want to monitor.
Application name: Specify the name of the Matrix Server application to be associated
with this device monitor. Matrix Server applications are used to group related virtual
hosts, service monitors, and device monitors on the Applications tab. If you leave
this field blank, Matrix Server will use the name of the device monitor as the
application name.
Configure device monitors222