4.0.0 HP Polyserve Matrix Server Administration Guide (T5392-96052, March 2010)

• By the psd or psv name, such as psd2p2 or psv1
For a complete description of the options, see the HP PolyServe Matrix Server
command reference guide.
Perform a filesystem check
If a filesystem is not unmounted cleanly, the journal will be replayed the next time
the filesystem is mounted to restore consistency. You should seldom need to check
the filesystem. However, if a filesystem was corrupted by a hardware or software
failure, you can repair it with the psfscheck utility.
To run the utility from the Management Console, select the filesystem, and then
right-click and select Check for Errors.
You will then see a message warning you that data loss can occur if any files are
open while the filesystem is being checked.
When you click Yes, the psfscheck utility is started. It runs in read-only mode and
does not replay the journal or fix any corruption.
IMPORTANT:
HP recommends that you let the check run to completion. Canceling the check can
potentially leave your filesystem in a corrupted state.
HP PolyServe Matrix Server administration guide 131