4.0.0 HP Polyserve Matrix Server Administration Guide (T5392-96052, March 2010)

Create the filesystem with support for 8.3 short file names and name tunneling
enabled. These features should be enabled only if you have a specific need for
them, as the use of 8.3 files causes degradation in filesystem performance. The
degradation is proportional to the number of 8.3 files created. If 8.3 SFN support
is later disabled but 8.3 filenames exist, the performance degradation will con-
tinue.
allowextchar
Allow the extended character set to be used in 8.3 short file names. The -o
enable8dot3 option must also be specified.
enable-quotas
Enables quotas on the filesystem.
The following options can be used with enable-quotas:
default=<size>[K|M|G|T]
Set the default hard quota on the filesystem. (The default is rounded down to the
nearest filesystem block.) The <size> argument can include one of the following
optional modifiers to specify the unit: K (kilobytes), M (megabytes), G (gigabytes),
or T (terabytes). If one of these modifiers is not specified, the <size> will be inter-
preted in bytes. If the default quota limit is not specified on the command line,
the limit will be set to 0, which means there is no default limit.
softdefault= <size>[T|G|M|K]
Set the default soft quota on the filesystem. The optional modifiers are the same
as default.
static-default or dynamic-default
With static-default, quota limits for new users are copied from the default
quota values set for the filesystem. With dynamic-default, quota limits for
new users are linked from the default quota values set for the filesystem. If the
default quota values are changed, the users’ quota limits will also change.
static-default is the default.
loghardlimit or nologhardlimit
Whether file operations that result in exceeding a user’s hard limit are logged
in the system event log. nologhardlimit is the default.
logsoftlimit or
nologsoftlimit
Whether file operations that result in exceeding a user’s soft limit are logged in
the system event log. nologsoftlimit is the default.
enforcehardlimit
or
noenforcehardlimit
HP PolyServe Matrix Server administration guide 115