3.7.0 HP StorageWorks HP Scalable NAS File Serving Software installation guide HP Scalable NAS for Linux (AG513-96004, October 2009)

Remote Management Controller Vendor. Select the vendor for your Remote
Management Controllers. For an IBM BladeCenter, also specify the Blade slot.
If you will be using IPMI as the fencing method, you should be aware that only one
IPMI session can be active at a time. HP Scalable NAS will fail to fence a server if
another IPMI session is already active on that server at the time that the fencing
attempt is made.
Remote Management Controller ID. Specify how HP Scalable NAS should identify
the Remote Management Controller associated with each server. Use one of the
following methods.
• Enter the hostname or IP address for the Remote Management Controller associated
with this cluster server. You will need to use this method if your Remote Manage-
ment Controllers are from different vendors. This method must also be used for
IBM BladeCenter servers.
• Select Cluster-wide Pattern and then specify the common naming scheme that
you are using for the Remote Management Controllers (either a hostname suffix
or an IP address delta, as described below).
Install HP Scalable NAS and FS Option for Linux38