3.7.0 HP StorageWorks HP Scalable NAS File Serving Software event notification guide HP Scalable NAS for Linux (AG513-96007, June 2009)

Message and Corrective ActionID
FenceAgent <IP_address>: no response to queries from <server> resolved.
Action. None. Alert 13933 is resolved.
13934
FenceAgent: disabled status being reported on <IP_address>.
Fabric fencing is configured and there is an operational problem with the specified
FibreChannel switch.
Action. Check the switch for faulting or failed components such as GBICs and/or
faulting slots.
13935
FenceAgent: disabled status being reported on <IP_address> resolved.
Action. None. Alert 13935 is resolved.
13936
Singleton cluster unable to take control of SAN, because the cluster that includes
NN.NN.NN.NN currently controls the SAN. Possibly this server has not been added
to the cluster or has been deleted from the cluster, or possibly a networking failure
or misconfiguration has partitioned this server from the servers that control the
SAN.
Action. Check the cluster configuration and add the server if it is not currently a
member. Also check the network to ensure that the server can communicate with
the rest of the cluster.
17001
Singleton cluster takes control of SAN failure resolved.
Action. None. Alert 17001 is resolved.
17002
This cluster unable to take control of SAN, because another cluster that includes
NN.NN.NN.NN currently controls the SAN. Possibly a networking failure or
misconfiguration has partitioned these servers from the servers that control the
SAN, or possibly this cluster has been misconfigured to share membership partitions
with another cluster.
Action. Check the cluster configuration and add the server if it is not currently a
member. If your site has more than one cluster, use mprepair to make sure that
this server is using the correct set of membership partitions.
17003
This cluster takes control of SAN failure resolved.
Action. None. Alert 17003 is resolved.
17004
Event messages34