3.7.0 HP StorageWorks HP Scalable NAS File Serving Software command reference guide HP Scalable NAS for Linux (AG513-96003, October 2009)

--hostsuffix <host suffix>
The common suffix to append to each server name to determine the associated
Remote Management Controller name. For example, if your server names are
server1 and server2 and their Remote Management Controllers are server1-iLO
and server2-iLO, specify -iLO as the suffix.
--ipdelta <ip delta>
The delta to add to each server’s IP address to determine the IP addresses of the
associated Remote Management Controllers. For example, if your servers are
1.255.200.12 and 1.255.200.15 and their Remote Management Controllers
are 1.255.201.112 and 1.255.201.115, specify 0.0.1.100 as the delta.
--mixedvendor yes|no
Whether the vendor and type settings apply to all servers.
[--rpassword <password>]
The password for the Remote Management Controller.
--ruser <user name>
The user name for the Remote Management Controller.
[--sharedlogin yes|no]
Whether the login is shared by all servers.
--type reset|shutdown
When a server needs to be restricted from the SAN, HP Scalable NAS can either
power-cycle the server or shut it down. Select the method that you want to use
(either reset or shutdown).
--vendor <vendor>
The vendor for your remote management controller (dell, hp, ibm, or ipmi).
mx config adminfs – administrative filesystem
commands
The replication feature and the Performance Dashboard require that an administrative
filesystem exist on the cluster. This filesystem can also be used for the mxfs reply
cache, which FS Option uses when the virtualized NFSD RPC reply cache feature is
enabled. The administrative filesystem should be used only for HP Scalable NAS
operations.
mx commands98