3.7.0 HP StorageWorks HP Scalable NAS File Serving Software command reference guide HP Scalable NAS for Linux (AG513-96003, October 2009)

The default SNMP community string for HP Scalable NAS is private. If you want
to use a custom community string, use the --community option to enter the
appropriate value. The SNMP community string must be set to the same value on HP
Scalable NAS and on the SAN switches.
import—Import the cluster configuration
mx config import <server>
This command can be used when the cluster is either online or offline.
license—Set the cluster license file
mx config license <file name>
The filename specifies the location of the HP Scalable NAS license file. This command
can be used when the cluster is either online or offline.
list—Get the cluster configuration
mx config list [--bladeslot] [--fence_module] [--description]
[--hostname] [--hostsuffix] [--ipdelta] [--license] [--mixedvendor]
[--os] [--mps] [--protocol] [--santype] [--servers] [--sharedlogin]
[--snapshots] [--status] [--switches] [--type] [--ruser] [--vendor]
This command can be used when the cluster is either online or offline. With no
options, the command displays the entire cluster configuration. You can use the
options to limit the output to certain components. The options return the following
information:
[--bladeslot]
For the IBM BladeCenter only, the blade slot.
[--fence_module]
The currently configured fencing module (Fibre Channel or web-based).
[--description]
The description assigned to this cluster.
[--license]
The current license.
[--os]
The name of the operating system.
[--mps]
The current membership partitions.
[--protocol]
HP Scalable NAS File Serving Software command reference guide 95