3.7.0 HP StorageWorks HP Scalable NAS File Serving Software command reference guide HP Scalable NAS for Linux (AG513-96003, October 2009)

DescriptionCommand
Set the SAN storage typesantype
Set the cluster secret license keysecret
Test the fencing configurationtestfencing
Configure the web-based fencing modulewebfencing
check—Check the cluster configuration
mx config check
This command specifies whether cluster components are configured or unconfigured.
It does not verify that components are configured correctly. To see the state of each
component, use commands such as mx config list and mx config mp list.
This command can be used when the cluster is either online or offline.
description—Set the cluster description
mx config description <description>
The description can contain up to 80 characters. This command can be used only
during the initial configuration of the cluster or when the cluster is online.
dump—Dump the cluster configuration
mx config dump
This command can be used when the cluster is either online or offline.
export—Export the cluster configuration
mx config export <server> ...
This command can be used when the cluster is either online or offline.
fcfencing—Set Fibre Channel as the fencing method
mx config fcfencing
This command can be used only when the cluster is offline.
fcswitch—Configure a Fibre Channel switch into the cluster
mx config fcswitch [--community <string>] <switch> ...
This command can be used only when the cluster is offline. If you set Fibre Channel
as the fencing method, you must also configure the Fibre Channel switches connected
to the cluster. This step is optional for web-based fencing.
mx commands94