3.7.0 HP StorageWorks HP Scalable NAS File Serving Software command reference guide HP Scalable NAS for Linux (AG513-96003, October 2009)
spctl – dump the SanPulse trace buffer
Synopsis
/opt/hpcfs/tools/spctl -l
Description
This command should be run only at the request of HP personnel.
spdebug – obtain SanPulse debug information
Synopsis
/opt/hpcfs/tools/spdebug
Description
This command should be run only at the request of HP personnel.
spstat – show cluster state information
Synopsis
/opt/hpcfs/tools/spstat
Description
This command should be run only at the request of HP personnel.
warnquota – warn users of quota limits
Synopsis
/opt/hpcfs/sbin/warnquota
Description
This command is based on the Linux warnquota command but has been modified
to work with PSFS filesystems as well as the standard Linux filesystem types. The
command is provided on the HP Scalable NAS quota tools RPM. There are no changes
to the syntax or operation of the command. See the Linux warnquota man page
for details about using the command.
Cluster commands82