3.7.0 HP StorageWorks HP Scalable NAS File Serving Software command reference guide HP Scalable NAS for Linux (AG513-96003, October 2009)

Show local device information
The -l option displays the local device name for each disk, as well as the default
disk information. When combined with -u, it displays local device names for
unimported disks.
# sandiskinfo -al
Disk: /dev/psd/psd5
Uid: 20:00:00:04:cf:13:32:d1::0 SAN info: switch fcswitch port 7
Vendor: SEAGATE ST336704FC Capacity: 34732M
Local Device Path: /dev/sda
partition 01: size 3905M type Linux (83)
partition 02: size 813M type Linux (83) (PSFS Filesystem)
partition 03: size 7813M type Linux (83) (Membership Partition)
Show filesystem information
The -f option displays existing PSFS filesystems on imported disks.
# sandiskinfo -f
Volume: /dev/psv/psv1 Size: 2439M (PSFS Filesystem)
Stripesize=0K
Local Mount Point=/mnt
Volume: /dev/psd/psd1p6 Size: 490M (PSFS Filesystem)
Disk=20:00:00:04:cf:13:38:18::0 partition=06 type=Linux (83)
Local Mount Point=(not mounted)
Show available volumes
The -v option lists available volumes on imported disks. These volumes are not
currently in use for a PSFS filesystem or a membership partition.
# sandiskinfo -v
Volume: /dev/psd/psd5p1 Size: 3905M
Disk=20:00:00:04:cf:13:32:d1::0 partition=01 type=Linux (83)
Volume: /dev/psd/psd5p2 Size: 7386M
Disk=20:00:00:04:cf:13:32:d1::0 partition=01 type=Linux (83)
Options for dynamic volumes
The following sandiskinfo options apply only to dynamic volumes.
HP Scalable NAS File Serving Software command reference guide 79