3.7.0 HP StorageWorks HP Scalable NAS File Serving Software command reference guide HP Scalable NAS for Linux (AG513-96003, October 2009)

The options are:
-i
Display information for imported disks (the default).
-u
Display information for unimported disks.
-v
Display available volumes.
-f
Display PSFS filesystem volumes.
-a
Display all information; for -v, display all known volumes.
-l
Additionally display host-local device name.
-r
Additionally display local device route information.
-U
Display output in the format used by the Management Console. This option is
used internally by HP Scalable NAS and does not produce human-readable
output.
-q
Suppress output of all log messages.
Following are some examples of these options.
Show partition information
The -a option also lists the partitions on each disk. When combined with -u, it
displays partition information for unimported disks.
# sandiskinfo -a
Disk: /dev/psd/psd5
Uid: 20:00:00:04:cf:13:32:d1::0 SAN info: switch fcswitch port 7
Vendor: SEAGATE ST336704FC Capacity: 34732M
partition 01: size 3905M type Linux (83)
partition 02: size 813M type Linux (83) (PSFS Filesystem)
partition 03: size 7813M type Linux (83) (Membership Partition)
Cluster commands78