3.7.0 HP StorageWorks HP Scalable NAS File Serving Software command reference guide HP Scalable NAS for Linux (AG513-96003, October 2009)

rplwatch – watch PSFS filesystems and directories in
the replication set
Synopsis
/opt/hpcfs/bin/rplwatch <options> <directory name>
Description
This process watches the PSFS filesystems and directories that are included in the
replication set specified in the configuration file. (There is a separate instance of the
process for each directory.) For each replication interval, rplwatch verifies that the
filesystem is mounted and then creates log files noting any files that have been added,
changed, or deleted during the interval. The process also starts worker threads to
perform the data transfer at the end of each replication interval. rplwatch is invoked
by rplmonitor and in general does not need to run manually.
sandiskinfo – show SAN disk/LUN information
Synopsis
/opt/hpcfs/bin/sandiskinfo [-i|-u|-v|-f] [-alr] [-U] [-q] [--subdevices]
[--dynvolumes] [--dynvol_properties [volname]]
Description
The sandiskinfo command can display information for both imported and
unimported SAN disks (or LUNs) and also for dynamic volumes. Under normal
operations, the sandiskinfo output should be the same on all servers in the cluster.
Disk information
With no options, sandiskinfo displays the UID, vendor, model, and capacity of
each imported disk and specifies the FC switch used to access the disk.
# sandiskinfo
Disk: /dev/psd/psd5
Uid: 20:00:00:04:cf:13:32:d1::0 SAN info: switch fcswitch port 7
Vendor: SEAGATE ST336704FC Capacity: 34732M
Following are commonly used options for imported and unimported disks:
sandiskinfo [-i|-u|-v|-f] [-alr] [-U] [-q]
HP Scalable NAS File Serving Software command reference guide 77