3.7.0 HP StorageWorks HP Scalable NAS File Serving Software command reference guide HP Scalable NAS for Linux (AG513-96003, October 2009)

0 – enabled
1 – not enabled
2 – could not open or read disk
3 – a bad argument was specified
--version
Display the version of the on-disk filesystem format.
--blocksize
Display only the block size used by the filesystem.
--verbose, -v
Enable verbose messages.
psfslabel – label a PSFS filesystem
Synopsis
/opt/hpcfs/bin/psfslabel <device> “<label>”
Description
The psfslabel command adds a label to the specified device.
psfsquota – manage disk quotas
Synopsis
/opt/hpcfs/sbin/psfsquota [--enable-quotas] [--disable-quotas]
[--set-udq <size>[T|G|M|T]] [--set-gdq <size>[T|G|M|T]]
[-y] <device>
Description
The psfsquota command can be used to enable or disable quotas on a filesystem
and to set the default quota for users and groups.
device is a psd or psv device and is specified as follows:
• For a psd device partition, the device is specified as /dev/psd/psdXXXpYY,
where XXX is the drive number and YY is the partition number. As an example,
/dev/psd/psd6p4 specifies partition 4 on disk psd6.
• For a non-partitioned psd device, the device is specified as /dev/psd/psdXXX,
where XXX is the drive number. For example, /dev/psd/psd5.
HP Scalable NAS File Serving Software command reference guide 63