3.7.0 HP StorageWorks HP Scalable NAS File Serving Software command reference guide HP Scalable NAS for Linux (AG513-96003, October 2009)

The -l command adds the specified HBA port to the list of local ports; -L re-
moves the specified port. The mxsanconf command invokes PSANcfg with
these options; they should not be run directly.
-u switch ...
Unfence all local ports on the specified FC switches.
-c community_string
Set the snmp community string.
-h
Print a usage message.
PSANinfo – show FC logins, Naming Database
Synopsis
/opt/hpcfs/sbin/PSANinfo [-n] [-c <community_string>] [[-s]|[-u]] <switchname>
Description
The PSANinfo command can be used to print the Naming Database or to get a
snapshot of logins for a particular Fibre Channel switch.
The options are:
-n
Print the contents of the Naming Database.
-c <community_string>
If the cluster uses a custom community string to access the FC switch, use this
option to specify the string. The PSANinfo command will fail if this option is
not specified for configurations using a custom community string.
-s
Wait <s> seconds between probes of the FC switch.
-u
Wait <u> microseconds between probes of the FC switch.
If no options are specified, PSANinfo displays the status of the switch one time only.
Following is a sample snapshot:
Switch 99.10.11.240 : 1588 Fibre Channel Switch.
IP addr 99.10.11.240 WWN 10000060693025CD Fabric ID 10000060693025CD
1 module
Module 1 : 10000060693025CD state 1 has 8 ports
Port 0 : oper 2 admin 1
HP Scalable NAS File Serving Software command reference guide 57