3.7.0 HP StorageWorks HP Scalable NAS File Serving Software command reference guide HP Scalable NAS for Linux (AG513-96003, October 2009)

Event fields. The filter event fields are:
The time the event was stored on the local node. The time must be specified
as YYYY-MM-DDTHH:NN:SS. The year (YYYY) is the only required element.
The month (MM), day (DD), hour (HH), minute (NN) and second (SS) must
be two digits in length and can include a leading zero (for example, 2007-
11-12T08:01:59.) If a time is specified, the month and day must also be
specified. If a time or date element is not specified, it is assumed to be
zero.
postedtime
The time at which the event occurred on the generating node. The time is
specified in the same manner as the postedtime field.
eventtime
The IP address from which the event was generated, specified in dotted-
decimal format.
location
The process ID of the process that logged the event (an integer between 0
and 65536).
processid
The ID assigned to the event (the range of values is 0 to 65536).eventid
The ID assigned to the category for the event.categoryid
The severity level of the event (the values are: success, debug, info, warning,
error, critical, emergency, auditsuccess, auditfailure).
severity
The component that generated the message.source
The event subject. This field can be used only with the = operator. The right-
hand side must be an extended regular expression string surrounded by
the “[” and “]” characters. See the examples below.
subject
The text included with the message. This field has the same restrictions as
the subject field.
message
Operations. The supported filter operations are:
Test if a filter event field is equal.=
Test if a filter event field is less than or equal.<=
Test if a filter event field is not equal.<>
Test if a filter event field is less than.<
Test if a filter event field is greater than or equal.>=
HP Scalable NAS File Serving Software command reference guide 23