3.7.0 HP StorageWorks HP Scalable NAS File Serving Software command reference guide HP Scalable NAS for Linux (AG513-96003, October 2009)

mx vhost – virtual host commands
Use the following commands to configure virtual hosts or to display their status.
DescriptionCommand
Add a new virtual hostadd
Delete a virtual hostdelete
Disable a virtual hostdisable
Dump the virtual host configurationdump
Enable a virtual hostenable
Rehost, or move, a virtual host to another servermove
Show status for a virtual hoststatus
Modify an existing virtual hostupdate
Use the following commands to configure virtual hosts or to display their status.
add—Add a new virtual host
mx vhost add [--application <application>] [--policy autofailback|nofailback]
[--activitytype single|always] <vhost> ([<network_interface> ...]
[ALL_SERVERS <network_interface>])
The options are:
--application <application>
The application associated with this virtual host. If you do not specify an applic-
ation, the IP address for the virtual host will be used.
--policy autofailback|nofailback
The failback action that the virtual host will take following failover to a backup
node. autofailback will fail back when a higher-ranked node provides equal
or greater services than the backup node; nofailback fails back only if a
higher-ranked node provides greater services than the backup node. autofail-
back is the default.
--activitytype single|always
mx commands146