3.7.0 HP StorageWorks HP Scalable NAS File Serving Software command reference guide HP Scalable NAS for Linux (AG513-96003, October 2009)

DescriptionCommand
Dump the server configuration to stdoutdump
Enable one or more previously disabled serversenable
List the servers in a clusterlist
List the operating system and HP-PolyServe software installed on the
server
listsoftware
Mark a server as downmarkdown
Read the license file on a serverread_license
Start HP Scalable NAS on one or more serversstart
Display server statusstatus
Stop HP Scalable NAS on one or more serversstop
Update one or more servers in a clusterupdate
View events that have occurred on the serverviewevents
add—Add a server to the cluster
mx server add [--serverSeverity autorecover|noautorecover] <server> ...
The --serverSeverity argument specifies whether virtual hosts will automatically
fail back to the original server after that server has recovered from a complete system
outage. The default is autorecover. This command can be used when the cluster
is either running or offline.
delete—Delete one or more servers from a cluster
mx server delete <server> ...
This command can be used when the cluster is either running or offline.
disable—Disable one or more servers
mx server disable <server> ...
dump—Dump the server configuration to stdout
mx server dump
HP Scalable NAS File Serving Software command reference guide 139