3.7.0 HP StorageWorks HP Scalable NAS File Serving Software command reference guide HP Scalable NAS for Linux (AG513-96003, October 2009)

DescriptionCommand
Remove an Export Groupdelete
Disable an Export Groupdisable
Dump the Export Group configurationdump
Enable an Export Groupenable
Show the status of an Export Groupstatus
Modify the configuration of an Export Groupupdate
add—Add an Export Group
mx exportgroup add [--exports <exports_file>] [other-arguments]
[--vnfs <vnfs1>,<vnfs2>,...] <exportgroup_name>
The --exports option specifies a file containing export records that will be imported
into the Export Group. The --vnfs option specifies Virtual NFS Services that should
be associated with this Export Group.
The other arguments are:
[--timeout <seconds>]
This option is no longer supported as of the 3.5.1 release. Instead, use the nf-
sprobe configure command to set the timeout.
[--frequency <seconds>]
The interval at which the high-availability monitor probes the NFS service. The
default is 30 seconds.
[--probeSeverity nofailover|autorecover|noautorecover]
The failover behavior for the high-availability monitor. nofailover prevents
failover of Virtual NFS Services when the probe fails. autorecover fails over
the Virtual NFS Services, and when the NFS service is restored on the original
node, fails the Virtual NFS Services back to the original network interfaces.
noautorecover fails over the Virtual NFS Services but does not fail them back
after the NFS service restored. The default is autorecover.
[--ordering serial|parallel]
Whether a strict ordering sequence should be enforced when Start or Stop scripts
are run. The default is serial, the strict ordering sequence.
[--recoveryScript <script>]
mx commands120