3.7.0 HP StorageWorks HP Scalable NAS File Serving Software command reference guide HP Scalable NAS for Linux (AG513-96003, October 2009)

For hpmsa2000 and engenio, use the --controllerA <hostname|IP_ad-
dress> option to specify the hostname or IP address for controllerA on the
storage array. For hpeva, use the --hostname <hostname> option to specify
the hostname for the management appliance. For hpxp, use either the --in-
stanceL <number> or --instanceR <number> option.
mx device – device monitor commands
Use the following commands to configure device monitors or to display their status.
DescriptionCommand
Add a device monitoradd
Clear device monitor error condition and alertclear
Remove a device monitordelete
Disable a device monitordisable
Dump the device monitor configurationdump
Enable a device monitorenable
Set the Global Event Delayglobalsettings
Show the status of device monitorsstatus
Modify the configuration of a device monitorupdate
add—Add a device monitor
mx device add --type <type> --servers <server1>,<server2>,...
[arguments] <devicename>
--type specifies the type of device monitor to be created: CUSTOM, DISK, or
SHARED_FILESYSTEM.
--servers specifies the server or servers that use the monitored device. The
<devicename> can include up to 32 characters.
The optional arguments are:
[--application <application>]
The application associated with this device monitor.
[--timeout <seconds>]
HP Scalable NAS File Serving Software command reference guide 107