3.7.0 HP StorageWorks HP Scalable NAS File Serving Software command reference guide HP Scalable NAS for Linux (AG513-96003, October 2009)

The password for the storage array controller.
The mx config snapshot showtype command also lists the options available
for your snapshot method.
delete—delete a snapshot method configuration
mx config snapshot delete --method <type> <array-specific options>
The options are:
--method <type>
The supported types are hpmsa2000, hpxp, hpeva, and engenio.
<array-specific options>
For hpeva, use the --hostname option to specify the hostname for the man-
agement appliance. For hpmsa2000 and engenio, use the --controllerA
option to specify the hostname or IP address for controllerA on the storage array.
For hpxp, use either the --instanceL <number> or --instanceR <num-
ber> option.
list—list all existing snapshot method configurations
mx config snapshot list [--noHeaders] [--csv] [--showBorder]
The options are:
[--noHeaders]
Do not display column headers in the output.
[--csv]
Display the output in comma-separated value format.
[--showBorder]
Include a table border in the output.
showtype—show available snapshot methods
mx config snapshot showtype
test—test an existing snapshot method configuration
mx config snapshot test --method <type>
<array-specific options>
The options are:
--method <type>
The supported types are hpmsa2000, hpxp, hpeva, and engenio.
<array-specific options>
mx commands106