3.7.0 HP StorageWorks HP Scalable NAS File Serving Software command reference guide HP Scalable NAS for Linux (AG513-96003, October 2009)

This command can be used to resilver a corrupt membership partition. <uuid> is
the disk UID of the membership partition to be repaired. The --reuse option allows
disks that contain existing volume information to be reused. (The existing data is
destroyed.) The --reuse option is available only when the cluster is offline.
set—Add or replace membership partitions
mx config mp set [--recreate] [--force] [--reuse] <uuid1/partno>
[<uuid2/partno> <uuid3/partno>]
A cluster can use either one or three membership partitions. <uuid1/partno> is
the uuid and partition number of the first membership partition; <uuid2/partno>
is the second membership partition, and <uuid3/partno> is the third membership
partition. The options are:
[--recreate]
Allow existing membership partition information to be destroyed.
[--force]
Force membership partition replacements to occur even if the partitions to be
replaced cannot be invalidated.
[--reuse]
Allow disks that contain existing volume information to be reused. (The existing
data is destroyed.)
mx config snapshot – snapshot method commands
Use the following commands to manage snapshot methods.
DescriptionCommand
Add a new snapshot method configurationadd
Delete a snapshot method configurationdelete
Dump the snapshot configurationdump
List all existing snapshot method configurationslist
Show available snapshot methodsshowtype
Test an existing snapshot method configurationtest
mx commands104