3.7.0 HP StorageWorks HP Scalable NAS File Serving Software administration guide - HP Scalable NAS 3.7 for Linux (AG513-96002, October 2009)

Change the partitioning on a disk
The Linux fdisk utility can be used to change the partition layout on a SAN disk.
If the disk is currently imported into the cluster, you must first deport the disk.
When you use fdisk, the changes made to the partition table are visible only to
the server where you made the changes. When you reimport the disk, the other
servers in the cluster will see the updated partition table.
Display local disk information
The Disk Info window displays disk information from the viewpoint of the local server.
It can be used to match local disk names with the disk names that HP Scalable NAS
uses (the PSD Name). You can also use this window to import or deport SAN disks.
To see the disk information, select the server on the Management Console, right-click,
and then select View Local Disk Info. You can resize the columns on the Disk Info
window to view all of the information.
Configure the SAN90