3.7.0 HP StorageWorks HP Scalable NAS File Serving Software administration guide - HP Scalable NAS 3.7 for Linux (AG513-96002, October 2009)

• On the command line, enter the following:
mx server read_license <server>
Until the new license file is read on all servers, you may see alerts on the Management
Console reporting that the license file does not match on all servers.
Supported HP Scalable NAS features
The license agreement for each server determines which HP Scalable NAS features
are supported on that server. You can use the View Features option on the
Management Console to determine the supported features for a particular server.
Select the server on the Servers window, right-click, and select View Features.
The Supported Features window lists all of the HP Scalable NAS features. Any features
not supported by your license are greyed out.
Migrate existing servers to HP Scalable NAS
In HP Scalable NAS, the names of your servers should be different from the names
of the virtual hosts they support. A virtual host can then respond regardless of the
state of any one of the servers.
In some cases, the name of an existing server may have been published as a network
host before HP Scalable NAS was configured. You can either reassign the public
Configure servers76