3.7.0 HP StorageWorks HP Scalable NAS File Serving Software administration guide - HP Scalable NAS 3.7 for Linux (AG513-96002, October 2009)

Samba/CIFS network port numbers
Samba/CIFS uses the following port numbers.
DescriptionTransport TypePort
NetBIOS SMB ServiceTCP137
NetBIOS SMB ServiceUDP137
NetBIOS Datagram ServiceTCP138
NetBIOS Datagram ServiceUDP138
NetBIOS Sessions ServiceTCP139
NetBIOS Sessions ServiceUDP139
Microsoft Directory ServiceTCP445
Microsoft Directory ServiceUDP445
Change configurable port numbers
If it is necessary to change one or more of the network port numbers used by HP
Scalable NAS, simply add the service line or lines that you want to change to the /
etc/services file on all nodes in the cluster. (See the next section for the format
of the entries.) After editing the file, either reboot each node or stop and restart HP
Scalable NAS on all nodes.
HP Scalable NAS entries in the /etc/services file
The reconfigurable network port numbers available for HP Scalable NAS are as
follows. If a line shown below does not exist in the /etc/services file, the default
port will be chosen. If you need to reconfigure a port number, add the appropriate
line to the file and then modify the number. Port numbers can be changed but names
and transport types (tcp, udp) cannot.
pmxs-grpcommd 7659/tcp
pmxs-grpcommd 7659/udp
pmxs-grptoken 7660/udp
pmxs-grpadmin 7661/udp
pmxs-panpulse 8940/udp
HP Scalable NAS File Serving Software administration guide 67