3.7.0 HP StorageWorks HP Scalable NAS File Serving Software administration guide - HP Scalable NAS 3.7 for Linux (AG513-96002, October 2009)

When you select a partition and click Replace, you will see a confirmation message
describing the replace operation. A message also appears when the replace operation
is complete.
NOTE:
The Replace option on the Storage Settings tab is available only when HP Scalable
NAS is running.
Add membership partitions
When you initially configure the cluster, you can add either one or three membership
partitions, as described in the HP Scalable NAS File Serving Software installation
guide. If only one partition is configured, you can add two partitions when HP
Scalable NAS is either online or offline. Click Add on the Storage Settings tab to
create the partitions. The Add Membership Partition window then lists all of the disks
or LUNs that it can access. Select a disk or LUN for the first membership partition
you are adding.
SAN maintenance362