3.7.0 HP StorageWorks HP Scalable NAS File Serving Software administration guide - HP Scalable NAS 3.7 for Linux (AG513-96002, October 2009)

Membership partition states
The Storage Settings tab reports the state of each membership partition. The possible
states are:
• OK. The membership partition is functioning correctly.
• FENCED. The server has been fenced and cannot access the SAN. Start HP
Scalable NAS if it is not running or reboot the server.
• NOT_FOUND. HP Scalable NAS cannot find the device containing the member-
ship partition. Check the device for hardware problems. If the device is not
working or has been removed from the SAN, replace the membership partition.
• INACCESSIBLE. HP Scalable NAS can find the device containing the membership
partition, but it cannot read or write to it. Check the device for hardware problems.
If the issue cannot be resolved, replace the membership partition.
• RESILVER. The membership partition is not up-to-date. HP Scalable NAS will
resilver the membership partition automatically. You can resilver the partition
manually if desired.
SAN maintenance360