3.7.0 HP StorageWorks HP Scalable NAS File Serving Software administration guide - HP Scalable NAS 3.7 for Linux (AG513-96002, October 2009)

To enable a Global Event Delay from the command line, use this command:
mx device globalsettings [--eventdelay <seconds>]
If you do not specify the --eventdelay option, the command will return the current
value of the Global Event Delay.
Other configuration procedures
These procedures can be performed from the Servers or Applications tab on the
Management Console. Locate the appropriate device monitor and then right-click to
see the available procedures.
Delete a device monitor
Select the device monitor to be deleted, right-click, and select Delete.
To delete a device monitor from the command line, use this command:
mx device delete <devicename> ...
Disable a device monitor
Select the device monitor to be disabled, right-click, and select Disable.
To disable a device monitor from the command line, use this command:
mx device disable <devicename> <server> ...
Enable a device monitor
Select the device monitor to be enabled, right-click, and select Enable.
To enable a device monitor from the command line, use this command:
mx device enable <devicename> <server> ...
Clear device monitor error
To clear an error from a device monitor, select that monitor, right-click, and select
Clear Last Event.
To clear the device error from the command line, use this command:
mx device clear <devicename> <server> ...
HP Scalable NAS File Serving Software administration guide 343