3.7.0 HP StorageWorks HP Scalable NAS File Serving Software administration guide - HP Scalable NAS 3.7 for Linux (AG513-96002, October 2009)

on the servers used with the device monitor are dependent on the device monitor.
However, you can specify that only certain virtual hosts be dependent on the device
monitor.
For example, you might have a DISK monitor for a disk containing Web and FTP
files. If the disk fails, you want HP Scalable NAS to fail over the virtual hosts for these
services. The server might also provide mail service; however, the virtual host for this
service is not dependent on the disk and should not fail over if the disk fails.
If you are creating a SHARED_FILESYSTEM monitor, select the virtual hosts associated
with applications that access data on the PSFS filesystem being monitored.
To specify virtual hosts from the command line, use this option:
--vhosts <vhost1>,<vhost2>,...
Servers for device monitors
The Servers tab allows you to select the servers on which the device monitor will be
configured. You can also set some options related to the monitor probe operation
and failover.
Probe Type. The servers on which the monitor probe will occur. Select Single-Probe
to conduct the probe only on the server where the monitor is active. Select Multi-Probe
to conduct the probe on all servers configured for the monitor.
Configure device monitors340