3.7.0 HP StorageWorks HP Scalable NAS File Serving Software administration guide - HP Scalable NAS 3.7 for Linux (AG513-96002, October 2009)

To configure script ordering from the command line, use this option:
--ordering serial|parallel
Other configuration procedures
These procedures can be performed from the Servers, Virtual Hosts, or Applications
tab on the Management Console. Locate the appropriate service monitor and then
right-click to see the available procedures.
Delete a service monitor
Select the service monitor to be deleted, right-click, and select Delete.
To delete a service monitor from the command line, use this command:
mx service delete <vhost:port>
Disable a service monitor on a specific server
Select the service monitor to be disabled, right-click, and select Disable.
To disable a service monitor from the command line, use this command:
mx service disable <vhost:port> <server> ...
Enable a previously disabled service monitor
Select the service monitor to be enabled, right-click, and select Enable.
To enable a service monitor from the command line, use this command:
mx service enable <vhost:port> <server> ...
Remove service monitor from a server
To remove a service monitor from a network interface associated with a specific
server, right-click, and select Remove From Server. You will then be asked to verify
the operation.
View service monitor errors
To view the last error for a service monitor, select that service monitor, right-click,
and select View Last Error.
Configure service monitors326