3.7.0 HP StorageWorks HP Scalable NAS File Serving Software administration guide - HP Scalable NAS 3.7 for Linux (AG513-96002, October 2009)

Verbosity level. This selection controls the amount of information that is reported for
each node.
Columns. If locations are configured for the hosts, this selection controls the number
of columns that are used to display the racks. If locations are not configured, only
one column will be displayed regardless of the value selected here.
Click Full View to return to the Cluster Report.
Filesystem Aggregate View
Click Filesystem - Aggregate View on the Cluster Report to open the display. The
view reports total filesystem throughput and total filesystem I/O operations for the
selected filesystems. You can select up to five PSFS filesystems for the display from
the drag-down boxes under “Select Filesystems.” If you need to monitor more than
five filesystems, open another browser window.
By default, the view reports filesystem metrics for the last hour. Select a different
interval from the “Last” drag-down menu, or click Get Fresh Data to update the display.
Use the Hosts menu to select how you want the nodes to be identified (by local names,
full names, IP addresses, or locations).
HP Scalable NAS File Serving Software administration guide 291