3.7.0 HP StorageWorks HP Scalable NAS File Serving Software administration guide - HP Scalable NAS 3.7 for Linux (AG513-96002, October 2009)

• Enable or disable the Virtual NFS Service.
• Delete the Virtual NFS Service.
• Add a new Virtual NFS Service.
• Add a new Export Group.
• View all Export Groups.
On the Applications tab, right-click on an Export Group to see these options:
• View properties for this Export Group, including status.
• Delete this Export Group.
• Add a new Export Group.
• Rehost the Export Group.
• Enable or disable the Export Group on all servers.
• View all Export Groups.
You can also administer Export Groups at the server level. In the server column, select
the cell corresponding to the Export Group. Right-click to display the following options:
• View properties for this Export Group, including status.
• Delete this Export Group.
• Enable or disable the Export Group on this server.
• Rehost the Export Group.
• View or clear the last error for this Export Group on this server.
• Add a new Export Group.
• View all Export Groups.
For more information about these procedures, see Chapter 9, page 161.
Service and device monitors
The Applications tab provides the same procedures as the Servers and Virtual Hosts
tabs. The procedures are as follows:
• Delete the monitor
• Modify the configuration of the monitor
• Enable or disable the monitor on a specific server
• View or clear the last error
• Remove from server
HP Scalable NAS File Serving Software administration guide 285