3.7.0 HP StorageWorks HP Scalable NAS File Serving Software administration guide - HP Scalable NAS 3.7 for Linux (AG513-96002, October 2009)

Enable an application on a server: Left-click on the cell corresponding to the
application and server. Then right-click and select Enable.
Disable an application on a server: Left-click on the cell corresponding to the
application and server. Then right-click and select Disable.
Servers
To add a resource such as a service or device monitor to a server, left-click in the
cell for that server and resource, right-click, and select Add To Resource.
To remove a resource such as a service or device monitor from a server, left-click in
the cell for that server and resource, right-click, and select Remove From Server.
Virtual hosts
When you right-click on a virtual host, you can perform the same operations as are
available on the Servers or Virtual Hosts tab.
• Re-host, or move, the virtual host to another node in the cluster.
• Add a service monitor.
• Enable or disable the virtual host.
• View or change the properties for the virtual host.
• Delete the virtual host.
To perform these procedures, left-click on the cell for the virtual host (click in the Name
column). Then right-click and select the appropriate operation from the menu. See
Chapter 17, page 301 for more information about these procedures.
Virtual NFS Services and Export Groups
The Applications tab provides the same procedures as the Servers and Virtual Host
tabs.
On the Applications tab, right-click on a Virtual NFS Service to see these options:
• View properties for this Virtual NFS Service.
• Rehost the Virtual NFS Service.
Cluster operations on the Applications tab284