3.7.0 HP StorageWorks HP Scalable NAS File Serving Software administration guide - HP Scalable NAS 3.7 for Linux (AG513-96002, October 2009)

Traps are sent as SNMP v1 traps by the server that logged the event. The trap ID is
the HP Scalable NAS message ID.
You can change the information for an existing target by selecting it from the SNMP
Trap Forwarding Table and then clicking Edit Target. To remove a target, select it
from the table and click Remove Target.
To configure the SNMP notifier service from the command line, use this command:
mx eventnotifier configuresnmp --addtarget|--removetarget
[--community <value>] <target>
To test the service, use this command:
mx eventnotifier test --snmp
Configure the email notifier service
To configure the email notifier service, select the Email Notification Settings tab. This
service sends email to the specified addresses when an event configured for the
service occurs.
Configure event notifiers and view events242