3.7.0 HP StorageWorks HP Scalable NAS File Serving Software administration guide - HP Scalable NAS 3.7 for Linux (AG513-96002, October 2009)

• Select a message row, right-click, and then set or clear that message for the ap-
propriate notifier services.
To add or remove notifier events from the command line, use these commands. If
you do not specify a service, the events will be added or removed from all services.
You can specify individual event IDs or a range of IDs to be added. Use commas to
separate the values, for example: 100, 300-400,555.
mx eventnotifier addevents [--snmp] [--email] [--script] <event IDs
or ID range>
mx eventnotifier removeevents [--snmp] [--email] [--script] <event IDs
or ID range>
Configure the SNMP notifier service
To configure the SNMP notifier service, select the SNMP Trap Forwarding Settings
tab. This tab contains an SNMP Trap Forwarding Table that specifies the IP address
and community string needed to access SNMP targets. You can configure up to 32
targets.
Configure event notifiers and view events240