3.7.0 HP StorageWorks HP Scalable NAS File Serving Software administration guide - HP Scalable NAS 3.7 for Linux (AG513-96002, October 2009)

View events from the command prompt
HP Scalable NAS provides commands that can be used to view the cluster log on a
particular server and to view outstanding alerts.
View the Cluster Log
The following command displays the cluster log on the specified server:
mx server viewevents [--filter <string>] [--maxevents <number>]
--timestamp <startTime,endTime>] [--noHeaders] [--csv]
[--showborder] <server>
The options are:
--filter <string>
Filter the output, displaying only those events that match the specific <string>. If
this option is not specified, all events will be displayed.
[--maxevents <value>
The maximum number of events to view. The default is the last 1000 events in
the log file.
--timestamp <startTime,endTime>
Filter by a particular time range expressed as <startTime,endTime>.
--noHeaders
Do not display column headers in the output.
--csv
Display the output in comma-separated value format.
--showborder
Display borders in the output.
The mcs select command can also be used to view the cluster log. See the HP
Scalable NAS File Serving Software command reference guide for more information
about this command.
View outstanding alerts
The following command shows all outstanding alerts:
mx alert status [--noHeaders] [--csv] [--showborder]
[--severity <values>]
HP Scalable NAS File Serving Software administration guide 237