3.7.0 HP StorageWorks HP Scalable NAS File Serving Software administration guide - HP Scalable NAS 3.7 for Linux (AG513-96002, October 2009)

From the Applications tab
Select the Virtual NFS Service on the Applications tab, right-click, and then select
Rehost. The Virtual NFS Service Rehost window shown above then appears.
From the command line
Issue the following command, where <vnfs> is the Virtual NFS Service to be rehosted.
You will need to specify all network interfaces on which the Virtual NFS Service
should be configured (the primary and all backups).
mx vnfs move <vnfs> <networkinterface> ...
Other Virtual NFS Service procedures
Update a Virtual NFS Service
Select the Virtual NFS Service on the Management Console, right-click, and select
Properties.
To update the Virtual NFS Service from the command line, use this command:
mx vnfs update [--exportgroup <exportgroup_name>|NONE]
[--policy autofailback|nofailback] [--activitytype
single|always] <vnfs> <network_interface> ...
Disable a Virtual NFS Service
Select the Virtual NFS Service on the Management Console, right-click, and select
Disable.
To disable the Virtual NFS Service from the command line, use this command:
mx vnfs disable <vnfs>
Enable a Virtual NFS Service
Select the Virtual NFS Service on the Management Console, right-click, and select
Enable.
To enable the Virtual NFS Service from the command line, use this command:
mx vnfs enable <vnfs>
HP Scalable NAS File Serving Software administration guide 191