3.7.0 HP StorageWorks HP Scalable NAS File Serving Software administration guide - HP Scalable NAS 3.7 for Linux (AG513-96002, October 2009)

IP or DNS: Enter a hostname or IP address for this Virtual NFS Service.
Export Group: Select the Export Group that will be exported by this Virtual NFS
Service. If the Export Group has not yet been created, select NONE.
Always active: If you check this box, upon server failure, the Virtual NFS Service will
move to an active server even if the associated Export Group monitor is inactive or
down. If the box is not checked, failover will not occur when the associated monitor
is inactive or down on all of the backup servers and the Virtual NFS Service will not
be made active anywhere. (See Virtual host activeness policy, page 309 for details.)
Policy: The policy determines the failback action that the Virtual NFS Service will take
following a failover to a backup node.
• AUTOFAILBACK. This policy is intended to return the Virtual NFS Service to its
original configuration, or as close to it as possible, when the primary node is re-
turned to service. After the Virtual NFS Service fails over to a backup node, HP
Scalable NAS watches the health of the nodes that are higher in the list of servers
configured for that Virtual NFS Service. When the health of one of these nodes
Configure FS Option for Linux188