3.7.0 HP StorageWorks HP Scalable NAS File Serving Software administration guide - HP Scalable NAS 3.7 for Linux (AG513-96002, October 2009)

NFS Exports tab
This tab is used to configure the export records for the Export Group. An export
record specifies a PSFS filesystem or directory to be exported, the NFS clients allowed
to mount it, and the export options for the client.
You can type the export records directly on the form, optionally using the Export
Record Details window to construct the record, or you can import an existing exports
file.
Import an existing exports file
To import an existing file, click on Import from File and then select the file, which
must be on the local server that is running the Management Console. The default
Import location is the user’s home directory. When you select the appropriate file,
you will be asked whether you want the records in the file to replace any existing
records in the Export Group or to be appended to the existing records.
Comments are preserved from the imported file; however, any blank lines are
removed. The continuation character (\) is also removed as this character is not
allowed in an export record.
NOTE:
If an /etc/exports file existed on the server when FS Option was installed, the
file will have been preserved as /etc/exports.pre_mxfs.
Create export records
To add export records directly to the NFS Exports tab, click Insert. A row will then
open up on the NFS Exports tab.
Configure FS Option for Linux168