3.7.0 HP StorageWorks HP Scalable NAS File Serving Software administration guide - HP Scalable NAS 3.7 for Linux (AG513-96002, October 2009)

Deport a dynamic volume
The volume to be deported must contain a PSFS filesystem. During the deport
operation, the filesystem is unmounted and the psv binding (which HP Scalable NAS
uses to control access to the dynamic volume) is removed.
If the filesystem has persistent mounts, the mounts should also be deleted. Select the
filesystem on the Filesystems tab of the Management Console, right-click, and select
Edit Persistent Mounts. On the Edit Persistent Mounts window, select the servers where
the filesystem is mounted and then click Delete to remove the persistent mounts.
To deport a dynamic volume, select Storage > Dynamic Volume > Deport Volume.
Select the dynamic volumes that you want to deport and click Deport on the toolbar.
To deport dynamic volumes from the command line, use this command:
mx dynvolume deport <volumeName>
Configure dynamic volumes116