3.7.0 HP StorageWorks HP Scalable NAS File Serving Software administration guide - HP Scalable NAS 3.7 for Linux (AG513-96002, October 2009)

NOTE:
The new dynamic volume is unstriped. It is not possible to add striping to a converted
dynamic volume. If you want to use striping, you will need to recreate the volume.
To convert a basic volume, select the associated PSFS filesystem on the Management
Console, right-click, and select Convert to Dynamic Volume. The filesystem must be
unmounted.
To convert a basic volume to a dynamic volume from the command line, use the
following command:
mx dynvolume convert <filesystem>
Dynamic volume recovery
The Dynamic Volume Recovery feature provides the ability to rebuild a dynamic
volume from the LUNs originally in the volume. This feature can be used for purposes
such as the following:
• Move dynamic volumes from one cluster to another. Deport the dynamic volumes
on the original cluster and then import them on the new cluster.
• Recover dynamic volumes from mirrored LUNs for disaster recovery purposes.
Import the dynamic volumes from the mirrored LUNs to the replacement cluster.
HP Scalable NAS File Serving Software administration guide 115