3.7.0 HP StorageWorks HP Scalable NAS File Serving Software administration guide - HP Scalable NAS 3.7 for Linux (AG513-96002, October 2009)

To display the properties from the command line, use the following command:
mx dynvolume properties <volumeName>
Extend a dynamic volume
The Extend Volume option allows you to add subdevices to an existing dynamic
volume. When you extend the volume on which a filesystem is mounted, you can
optionally increase the size of the filesystem to fill the size of the volume.
The subdevices used for a striped dynamic volume are called a stripeset. When a
striped dynamic volume is extended, the new subdevices form another stripeset. The
original stripeset is filled first; then the new stripeset is filled. If you want the entire
dynamic volume to be in the same stripeset, you will need to recreate the volume.
To extend a dynamic volume on the Management Console, select Storage > Dynamic
Volume > Extend Volume and then select the volume that you want to extend.
If a filesystem is on the volume, the Extend Dynamic Volume window shows information
for both the dynamic volume and the filesystem.
Configure dynamic volumes110